T-Seam® Standing Seam
Our T-Seam® Standing Seam systems are the only type applicable for low-slope roofs as they can be watertight with the use of seams that either incorporate sealant in the seam or use double-lock-type seams.
- overview |
- Technical Data |
Before we share with you why our T-Seam® is your ideal standing seam solution, let us first share a few details about what standing seam roofing systems really are, their characteristics and why they supersede in quality, finishing, and performance the conventional sheet metal roofing systems.
By definition, standing seam roofing systems are metal roof systems that feature long, narrow panels. The long edge of the panel is oriented from gutter to ridge or valley. Upright, vertical edges folded closed on site join the long panels. Interlocking seams snap together, simplifying installation.
Standing-seam systems are the only type applicable for low-slope roofs because they can be watertight with the use of seams that either incorporate sealant in the seam or use double-lock-type seams.
Standing-seam systems also are applicable for steep-slope architectural roofs. They do not have exposed fasteners except at isolated locations, so they require less maintenance.
Perhaps the greatest advantage of standing-seam metal roofing is the ability to fabricate the panels on site using coils of sheet metal and a roll-forming machine. This process enables the fabricator to create panels that are continuous from ridge to gutter on each unique roof section.
Long panels eliminate cross laps, as well as reduce the potential leaks and the need for sealant maintenance. The disadvantage with long, continuous panels is the design requirement for thermal movement.
Sheet metal systems coated with highly reflective surfaces and designed with insulation and ventilation also can provide considerable cost savings for heating and cooling.
Roof surfaces also should have high emission ratings to allow solar energy and heat to dissipate quickly.
Innovative cool roof coatings for metal roofs have moderate to highly reflective surfaces over a range of colors — not just white — and some engineered coatings can increase the emissivity of the metal roof surface.
Thermal expansion and contraction is a great concern with metal roofing systems and is most acute with standing-seam systems because long panel runs can exceed 30 meters in length. The amount of thermal movement is a function of the panel’s length, the magnitude of the temperature change, and the coefficient of thermal expansion specific to the type of metal.
In climates where the diurnal temperature change is great — sometimes more than 100 degrees — a 120-foot-long piece of steel sheet metal can expand and contract more than 1 inch in length.
This thermal movement can pull out screws, elongate holes in panels, and cause panels to shift or bend.
A thoroughly design of the entire system using hidden clips and other attachment techniques allows for this thermal movement but prevent wind uplift. Installers must anchor systems at one end, typically at a ridge, and allow for movement provided at the opposing end, typically the gutter edge.
Aluminum-alloy coatings provide corrosion protection on steel sheet metal, but they react with alkaline chemicals in masonry mortar and cleaning solutions that might spill on the metal’s surface during construction.
Sheet metal underlay prevents moisture that condenses on the underside of the metal from leaking down into the building. The location of penetrations also is important on standing-seam roofs because it is difficult to seal a penetration that enters the roof through a rib or standing seam.
The usage of T-Seam® allows for the following premium advantages:
- High design flexibility
- Mechanically seamed side laps
- No fixing penetrations, concealed clip system
- Long sheet lengths, eliminating end laps
- Can be produced in lengths of upto 100m in a single sheet length.
- Produced on site for elimination of transport difficulties
- Fire Rated
- Insulated or Single Skin Options
- Condensation free
- Design flexibility
- Durable and corrosion resistant
- Weather tight
- Breathing roof
- Long lasting
- Maintenance free
- Energy efficient - Contributes to LEED and Pearl Ratings
- Leak proof
- FM Approved (USA)
- DBIT Approved (Germany)
The features which T-Seam® empowers architects with, include:
- Architectural Detail Design: We help you achieve any look you need
- Structural Design: All components designed and produced by TigerPROFILES
- Thermal Performance Design: Certified by 3rd Party Labs
- Acoustic Performance Design Certified by 3rd Party Labs
- System Condensation Risk Assessment & Prevention through the use of Vapor Barriers
- Fire Rated Performance Design: Integrated Use of Fire rated Mineral Wool Insulation
- Bi-Metallic corrosion Assessment & Prevention
- LEED Performance Assessment & Provision of Green Solutions.
- TS 75/300 Floor Deck Profile
- Roof Tile Profile
- Cool-It Ceram Coatings
- TR 45/250 (Roof & Wall)
- Insulated Ventilation Ducts
- Concealed Fix Wall Panels
- Cold Store Panels
- TR 47/180 (Roof & Wall)
- TR 45/150 (Roof & Wall)
- TR 45/150 (Roof & Wall)
- TR 35/200 (Roof & Wall)
- 18/76 Sinusoidal (Roof)
- TR 102/275 (Roof Deck)
- TS 47/180 Floor Deck Profile
- TS 60/300 Floor Deck Profile
- Z-Purlins & C-Channels
- Sag Rods
- Flashings & Accessories
- TR 45/250 (Roof & Wall)
Ideal for use on new buildings as well as retrofit applications, standing T‐Seam® profiles are available in various widths and heights to accommodate almost any project. In most instances, T‐Seam® panels are roll formed on site by a portable T‐Seam® manufacturing machine, thereby safeguarding against panel damage during transportation.
Unlike other standing seam systems, T‐Seam® has the added benefit of being produced in any width combination between 303 and 500mm (for the straight, concave and convex designed
In addition, T-Seam® is also characterized by its Performance and value for money as detailed here below:
Special pigmented organic color coatings to the base material of the roof not only enhances the aesthetic appearance but also act as an additional corrosion protection. The choice of colors allows the architects to coordinate the roof with other design elements of the building.
Durable and corrosion resistant
T-Seam® metal roofs are designed to ensure long-term durability and an aesthetically pleasing appearance while being resistant to corrosion and fading.
T-Seam® roofs are engineered to withstand rain, wind, snow and sun. Each panel is joined together by a mechanically locked T-Seam® raised above the roof’s drainage plane. The joint-free T-Seam® panel ensures that your roof will be leak-free for years to come.
T-Seam® is a breathing roof, in the sense it allows the trapped moisture to escape through the seam. The T-Seam® joints do not use any sealants. The weather tightness is guaranteed with the capillary groove provided in the small seam.
T-Seam® roof ensures adequate drainage from rain and snow, thus solving water leakage problems. The system is uniquely designed to handle the effects from thermal movements. The clips used in the system have a movable feature that allows the panels to expand and contract with temperature changes.
T-Seam® roofs can be used in almost any situation, from commercial to residential, from small storage buildings to large manufacturing plants. This roofing system lasts longer, needs less maintenance and offers superb versatility. Unlike flat built-up roofs that require frequent maintenance, T-Seam® roofs offer 15 years and more of trouble free performance with minimum maintenance and expense.
Value for Money
- Ability to retrofit
- Ability to be highly energy efficient with substantial energy savings
- Warranty for upto 20 years and beyond as per material specs
- After long lifetime can be sold for scrap for high return
Properly installed standing T-Seam® metal roof will provide longevity with very little maintenance. This exceptional return on investment makes the T-Seam® design the most cost-effective choice for many customers.
T-Seam® roofs can be installed in most retrofit projects, right over the existing built-up roofs, eliminating costly and time-consuming tear-offs.
We possess the capacity and ability to customize our T-Seam® panels to fit clients’ requirements. The material range which can be utilized to produce T-Seam® includes but is not limited to:
- Aluminum Alloy AA 3105 or AA 304
- Galvanized steel
- Color coated steel
- Stainless steel
T-Seam® can be provided in a perforated design using any of the above materials.
Aluminum panels can be supplied in either natural aluminum in stucco or mill finish. T-Seam® can also be supplied in color finishes of various systems such as polyester, multi coat PVDF, brushed zinc, brushed titanium, polyurethane etc. Special pigmented organic color coatings to the roof’s base material not only enhance the aesthetic appearance but also provide additional corrosion protection.T-Seam® can be supplied in the full range of RAL colors as well as in any special colors per your request.