The steel floor deck systems supplied by Tiger Profiles and Insulation for use in composite and structural slabs and decks, offer an immediate safe working platform that can reduce up to 30% of normally required usage of concrete while acting as permanent formwork and slab reinforcement in composite desks.

TPI manufactures deck profiles from a range of material and finishes including but not limited to GI Steel conforming to ASTM – A53; Grade D, structural quality with a yield of 345Mpa; and Galvanized mill finish varies from G60 to G90 i.e 180g/m2 to 275g/m².

TPI manufactures the following deck profiles from a range of material and finishes including but not limited to GI Steel conforming to ASTM – A53, Grade D, structural quality with a yield of 345Mpa. The galvanized mill finish varies from G60 to G90 i.e 180g/m2 to 275g/m².:
 

• TS 47/180: Characterized by its corrugated depth of 47mm, and a thickness exceeding 0.70mm, this profile is commonly used as a deck panel.
• TS 75/300: Characterized by its corrugated depth of 75mm, this profile is mainly used as a deck panel in floors that are of wide spans and superimposed loads.
• TS 60/300: Characterized by its corrugated depth of 60mm, this profile is mainly used as a composite deck.

TPI steel deck panels are characterized by:

• Cost effectiveness;
• Ease of installation;
• High durability